FPU-8-2 / Boh Cargo-12 Combination - This enables the user to join the FPU-8-2 and Boh Cargo-12 systems for deployment as ISO Type 1CX-classified containers for deployment on the top deck of a CT/MT ship. They can be de-linked in theater – serving as two independent container systems – as the mission requires simply by removing the ISO connector locks that secure them together. This combination measures 8’ W x 7.8’ H x 20’ L. USAF/AFMC-approved for air transport on C-130, C-141, C-5 and C-17. Approved for rail transport by International Union of Railways. FPU-8-2 accommodates over 27 different modules and glide-outs that are interchangeable with FPU-20 series. Boh Cargo-12 accommodates Parts Rack (w/ drawers), Bulk Rack (w/ pallets) or can be floor-loaded (w/ tie-down rings). Mobilizes and stores Class I, II, III (P), IV, VII, VIII and IX material. ISO-certified combination

FPU-8-2 / Boh Cargo-6 / FPU-8-2 Combination - ISO-configured envelope consisting of 2 each FPU-8-2 container with 1 each Boh Cargo-6 in between them. Envelope measures 8’ W x 7.8’ H x 20’ L. Containers are joined by bridge locks for transport by conventional ground systems. Combined or individual containers move as secondary load on CT/MT ship. FPU -8-2 accommodates over 27 different modules and glide-outs that are interchangeable with FPU -20 series. Boh Cargo-6 is primarily used for mobilization/storage of bulk Class I, II, III (P), IV, VII , VIII and IX material.

Note: For technical support on all of the above products, see user manuals.

Authorized Stockage List Mobility System (ASLMS) - ASLMS is a modified version of the FPU-8-2/Boh Cargo-12 combination system designed to mobilize and store Class IX repair parts. It features a bale bar in the end wall of the FPU-12 (modified Boh Cargo-12), removable roller wheels under the rear end of the FPU-8-3 (modified FPU-8-2) and a loading rail connector between the two containers. ASLMS is designed to be transported by all ground modes, including HEMTT-LHS and PLS without a flatrack. The Base ASLMS “System” consists of 2 containers: 1 each 20’ Parts Container (FPU-8/FPU-12 combination) and 1 each 20’ Bulk Container (FPU-8/FPU-12 combination). ASLMS is ISO-certified as CSC 1C; USAF/AFMC-approved for air transport on C-130, C-141, C-5 and C-17; approved for rail transport by International Union of Railways; and certified for Helicopter Sling Load for all capable USA and USMC helicopters. ASLMS was tested and certified by US Army Test Center at Aberdeen Proving Ground, MD in accordance with MIL-STD-810F. ASLMS features electrical/lighting/NBC protection capabilities. Only available via Natick Contracting Division, US Army Soldier Systems Center, Natick, MA. For technical support see user manuals.