Short/Helo Module - Measures 34” W (nominal) x 74” H x 42” D. Features a 5-drawer bottom half (4”, 6”, 8” drawers interchangeable with other FPU Modules) with a removable stand-alone cage on top half for bulk storage. Cage can accommodate shelf at over 30 optional intervals. Provides 3-G durability/security and can fit inside CH-47, CH-46, CH-53 and Osprey aircraft.

Weapons Module - Measures 34” W (nominal) x 74” H x 42” D. Accommodates 5 weapons (either M16A2 Rifle or 9mm Pistol) or weapons accessories/security drawers. M16A2 Drawer stores 8 weapons each. 9mm Drawer stores 56 weapons each. Each Weapons Module is a mobile arms vault that can secure up to 40 each M16A2 Rifles or 280 each 9mm Pistols. This module is secured by a 3-point locking system. Security Drawer is 8” deep for storage of weapons accessories, like scopes, night vision goggles and repair kits.

HAZMAT Module - Measures 34” W (nominal) x 74” H x 42” D. Meets NFPA 30 and 29 CFR requirements for storage of flammable/corrosive materials. Dual-wall construction with all-steel exterior and spark-resistant interior. USAF/AFMC-approved for transport on C-130, C-141, C-5 and C-17 both inside and outside of the FPU-8 and FPU-20 series container. Features 3G bar to secure all drawers in flight, secondary containment, pressure release valve and external grounding lug. The HAZMAT Module enables user to commingle flammables/corrosives with other material in the same FPU-8 or FPU-20 container.

Office Module - 2-man work station that fits inside FPU-8 or FPU-20 series container. Measures 69” W x 74” H x 88” L (unextended position) with adjustable ceiling height (internal) up to 84” H. Features quick-disconnect 110v 60 Hz power, retractable HVAC, shelf for printer/CPU/pop-up monitor, 2-stage door with automatic switch for low-voltage white/red light.

Stackable Modules - BOH offers 9 changeable Stackable Modules with Man-Portable drawers with Drawer Dividers. Each drawer can be fully extended within its modular steel frame or taken out independently and carried through standard doors and or down range. Each nestable drawer (4”, 6”, 8”, 10”, 12” and 16”) is weather tight and secured within the frame via cable locks. They are designed to support the distribution and operational management of re-supply, repair, special tools and Class 9 material. Their rugged steel construction and steel frame are highly mobile and are able to travel inside or outside of the FPU container systems. With no MHE actually required, the Stackable Modules are VOD / COD / Helo / AMC capable and are interoperable with all modes of ground transportation. The Stackable Modules offers full access to stored material while on the move.

Floor Adapter Plate - BOH’s Floor Adapter Plates are designed to be interchangeable; therefore, may be inserted into any of the FPU-8 and FPU-20 series container systems. These floor plates allow for storage and shipment of bulk commodities.